I became interested in driveway bells at a young age when I noticed my name "Milton" written on a service station bell. I pointed it out to my grandfather and said: "Hey look. There's my name on that bell." From that day I knew that I needed one of those bells.
Please feel free to call Milton directly with any questions at: 713-927-3914
|
|
|
|
|
|
Milton Bell |
"Original"
Bell
™ |
LOUD
Bells
|
Milton Chimes
Soft
|
Driveway Hose
|
Anchors
|
"Y" Hose Splitters
|
Very Long
Driveways |
|---|
Complete Milton Kits |
Complete "Original" Bell™ Kits |
The ONLY Complete Wireless "Original"Bell™ Kits on the Internet |
||||||
|---|---|---|---|---|---|---|---|---|
|
Reliable alarm systems that you can set up yourself. Here are three ways to solve your driveway alert needs. Each of our complete kits include all the pieces necessary to set up a complete working driveway bell system. These kits are perfect for drive-thru applications, residential drives and industrial locations. Fast-food, coffee shops, donation windows, dry cleaners, security guard stations, bank drive-thru's, pharmacies, and petrolinia collectors are just a few of the common uses. Years ago, every gas station had a bell. They made famous the familiar "Ding-Ding" when you drove your car over the black rubber hose.
Milton kits make a perfect gift for those who collect petrolinia memorabilia
such as old gas pumps and porcelain gas station signs.
The "Original"
Bell™
kit is the perfect solution for
most business and residential driveway alert needs. The tone of the
"Original"
Bell™
is similar to that of a small boxing-ring bell and the gong is fire engine red.
Set-up is simple. Just plug your bell into an ordinary electrical outlet,
push the driveway hose onto the bottom of the bell and tighten the hose clamp.
Push the other end of hose onto the nipple of the anchor and tighten the hose
clamp. That's it! You are now in business.
Features
|
0
item(s)
Click Below To Hear The Bell
Tell a friend:
Complete Original Kits
The "Original" Bell™ kit is perfect for drive-thru applications, residential drives and industrial locations.
The complete "Original" Bell™ kit includes all of the pieces necessary to set up your driveway bell system.
- One "Original" Bell™ driveway signal bell.
- Driveway Signal Hose (between 25' & 150' lengths of hose)
- One heavy die-cast end-of-hose anchor
- Two end-of-hose clamps. One clamp for the anchor end and the other for the bell end of the hose.
Click Below To Hear The Bell
Tell a friend:
Complete Milton Kits
The Milton kit is also perfect for drive-thru applications, residential driveways and, industrial locations.
The "Complete Milton Kit" includes all of the pieces necessary to set up your driveway bell system.
- One Milton 805 driveway signal bell - Packaged inside of Milton bell box.
- Driveway Signal Hose - Between 25' & 300' lengths of hose.
- One heavy die-cast end-of-hose anchor
- Two end-of-hose clamps. One clamp for the anchor end and the other for the bell end of the hose.
Your Milton bell will have a patent date of May 12, 1959 listed on the back of the Milton bell and on the end of the Milton Bell box.
Click Below To Hear The Bell
Tell a friend:
Complete Wireless Chime Kit
Our wireless kits are perfect for installations that need to monitor vehicle traffic up to 600' away. The driveway hose and black transmitter box can be set up at the end of a very long driveway and monitored with the wireless chime The wireless chime produces a soft ring and has a built-in volume control. The chime plugs into an ordinary electrical outlet. The end of driveway unit operates off of a 9 volt transistor battery.
The complete wireless kit includes all of the pieces necessary to set up your driveway bell system.
Click Below To Hear The Bell
Tell a friend:
Wireless Original Bell & Chime Kit
Our wireless "Original" Bell Kit is similar to our wireless chime kit except that it also includes a low-voltage "Original" Bell in addition to the electronic chime. The "Original" Bell rings at about 75dB for a duration of four seconds each time a vehicle arrives. The wireless chime produces a soft ring and has a built-in volume control. The "Original" Bell is connected to the wireless chime with a two strand low-voltage wire. 10' of two strand low-voltage wire is included with this kit.
The driveway hose and black transmitter box can be set up at the end of a very long driveway and monitored with the wireless chime and "Original" Bell™
The chime plugs into an ordinary electrical outlet and the "Original" Bell™ is connected to the wireless chime and gets it power from the chime. The end of driveway unit operates off of a 9 volt transistor battery.
This kit includes all of the pieces necessary to set up your driveway bell system.
- One wireless electronic chime with built-in volume control.
- One Low-Voltage "Original" Bell™
- Driveway Signal Hose (between 25' & 100' lengths of hose)
- 10' of two strand low-voltage wire to connect the "Original Bell™
- One heavy die-cast end-of-hose anchor
- Two end-of-hose clamps. One clamp for the anchor end and the other for the bell end of the hose.
- One 9 volt battery for the end of driveway transmitter unit (black box).
Click Below To Hear The Bell
Tell a friend:
Dual Wireless Chime Kit
This kit comes with two electronic receiver chimes and one end-of- driveway transmitter.
The chime plugs into an ordinary electrical outlet. The end of driveway unit operates off of a 9 volt transistor battery.
This kit includes all of the pieces necessary to set up your driveway bell system.
- Two wireless electronic chimes with built-in volume control.
- Driveway Signal Hose (between 25' & 100' lengths of hose)
- One heavy die-cast end-of-hose anchor
- Two end-of-hose clamps. One clamp for the anchor end and the other for the bell end of the hose.
- One 9 volt battery for the end of driveway transmitter unit (black box).
Click Below To Hear The Bell
Tell a friend:
Dual Wireless Original Bells & Chimes Kit
This kit comes with one end-of- driveway transmitter and two receiver chimes and two "Original" Bells. The "Original" Bell is connected to the wireless chime with a two strand low-voltage wire. 10' of two strand low-voltage wire is included with this kit.
The chime plugs into an ordinary electrical outlet and the "Original" Bell™ is connected to the wireless chime and gets it power from the chime. The end of driveway unit operates off of a 9 volt transistor battery.
This kit includes all of the pieces necessary to set up your driveway bell system.
- wireless electronic chimes with built-in volume control.
- Low-Voltage "Original" Bell™
- Driveway Signal Hose (between 25' & 100' lengths of hose)
- 10' of two strand low-voltage wire to connect the "Original Bell™
- One heavy die-cast end-of-hose anchor
- Two end-of-hose clamps. One clamp for the anchor end and the other for the bell end of the hose.
- One 9 volt battery for the end of driveway transmitter unit (black box).
Click Below To Hear The Bell
Tell a friend:
Wireless Chimes Kit with Two Transmitters
This kit comes with two end-of- driveway transmitters and one receiver chime. The chime plugs into an ordinary electrical outlet. The end of driveway units operate off of a 9 volt transistor battery.
This kit includes all of the pieces necessary to set up your driveway bell system.
- One wireless electronic chimes with built-in volume control.
- Driveway Signal Hose (between 25' & 100' lengths of hose)
- Two heavy die-cast end-of-hose anchor
- Four end-of-hose clamps. Two clamps for the anchor end and the other two for the transmitter units.
- Two 9 volt battery for the end of driveway transmitter unit (black box).
Click Below To Hear The Bell
Tell a friend:
Wireless Chime & Original Bell Kit with Two Transmitters
This kit comes with two end-of- driveway transmitters, one receiver chime and one low-voltage Original Bell. The chimes plug into an ordinary electrical outlet. The end of driveway units operate off of a 9 volt transistor battery.
This kit includes all of the pieces necessary to set up your driveway bell system.
- One wireless electronic chimes with built-in volume control.
- One low-voltage Original Bell
- 10' of two strand low-voltage wire to connect the Original Bell to the electronic chime.
- Driveway Signal Hose (between 25' & 100' lengths of hose)
- Two heavy die-cast end-of-hose anchor
- Four end-of-hose clamps. Two clamps for the anchor end and the other two for the transmitter units.
- Two 9 volt battery for the end of driveway transmitter unit (black box).
Click Below To Hear The Bell
Tell a friend:
Wireless Chimes with Two Transmitters
This kit comes with two end-of- driveway transmitters, and two receiver chimes. The chimes plug into an ordinary electrical outlet. The end of driveway units operate off of a 9 volt transistor battery.
This kit includes all of the pieces necessary to set up your driveway bell system.
- Two wireless electronic chimes with built-in volume control.
- Driveway Signal Hose (between 25' & 100' lengths of hose)
- Two heavy die-cast end-of-hose anchor
- Four end-of-hose clamps. Two clamps for the anchor end and the other two for the transmitter units.
- Two 9 volt battery for the end of driveway transmitter unit (black box).
Click Below To Hear The Bell
Tell a friend:
Dual Wireless Chimes & Original Bells Kit with Two Transmitters
This kit comes with two end-of- driveway transmitters, two receiver chimes and two low-voltage Original Bells. The chimes plug into an ordinary electrical outlet. The end of driveway units operate off of a 9 volt transistor battery.
This kit includes all of the pieces necessary to set up your driveway bell system.
- Two wireless electronic chimes with built-in volume control.
- Two low-voltage Original Bell
- Two 10' lengths of low-voltage wire to connect each of the the Original Bell to the electronic chimes.
- Driveway Signal Hose (between 25' & 100' lengths of hose)
- Two heavy die-cast end-of-hose anchor
- Four end-of-hose clamps. Two clamps for the anchor end and the other two for the transmitter units.
- Two 9 volt battery for the end of driveway transmitter unit (black box).
Click Below To Hear The Bell
Tell a friend:
Wireless Golf Pro-Shop Kits
These kits are for monitoring the return of golf carts to the pro-shop. When a golf cart crosses the rubber driveway hose a signal is transmitted wirelessly up to 600' away where a chime is sounded. The "Golf Pro-Shop Kit" is set so that it is sensitive enough to detect the weight of a golf cart.
The wireless chime produces a soft ring and has a built-in volume control. The chime plugs into an ordinary electrical outlet. The black transmitter box operates off of a 9 volt transistor battery. The Wireless "Golf Pro-Shop Kit" kit includes all of the pieces necessary to set up a golf cart monitoring system.
Click Below To Hear The Bell
Tell a friend:
Milton Bells
Just the Bell - Milton 805 - Perfect for systems that already have driveway hose and end-of-hose anchors and just need a new bell. The Milton bell operates with up to 300' of driveway hose. Your Milton bell will have a patent date of May 12, 1959 listed on the back of the Milton bell and on the end of the Milton Bell box.
Click Below To Hear The Bell
Tell a friend:
Click Below To Hear The Bell
Tell a friend:
Milton Chimes Kit
The Milton Chime kit is perfect for drive-thru and residential applications that require a softer ring than a standard Milton bell.
The "Complete Milton Chime Kits" include all of the pieces necessary to set up your driveway chime system.
Click Below To Hear The Bell
Tell a friend:
Just the Chime
Just the Chime - Milton 802 - Perfect for systems that already have driveway hose and end-of-hose anchors and just need a new chime. The Milton chime operates with up to 300' of driveway hose. The Milton chime sounds like a standard residential doorbell. The Milton chime rings "softer" than the Milton bell and can be used in office or residential locations.
Click Below To Hear The Bell
Tell a friend:
Milton Remote Controlled Chime
Milton Remote Controlled Chime - Milton 830 - Do you need a second Milton chime because you cannot hear your first Milton bell? This chime can be connected to an existing Milton bell using 110V electrical wire. The wiring diagram is included and shows how to connect this remote chime to a standard Milton bell. The connection requires a two strand 12-AWG wire. The Milton chime sounds like a standard residential doorbell. The Milton chime rings "softer" than the Milton bell and can be used in office or residential locations.
Click Below To Hear The Bell
Tell a friend:
High-Voltage Kit - Milton
This kit is designed to work on very long driveways using a high voltage connection (110V) between the remote switch and signal bell. The remote switch is usually located next to the driveway that is being monitored and is connected to directly to the end of the driveway hose. The signal bell is located where it can be heard which is usually inside of a building.
The remote switch and bell will need to be connected using high-voltage (110V) wiring that is not included with this kit.
This high-voltage kit includes:
- One Milton 827 remote controlled signal bell – This bell works with the Milton remote switch and cannot have a driveway hose connected directly to the bell.
- One Milton 825 remote switch - This unit is pictured as the silver rectangular weather-proof box in the picture on the left.
- Driveway Signal Hose (between 25' & 100' lengths of hose)
- One end of hose anchor.
- High-voltage electrical wire not included.
All electrical wiring should be performed by a qualified electrician.
Click Below To Hear The Bell
Tell a friend:
Remote Bells and Remote Switches - Milton
Remote Controlled Bell - Milton 827 - Do you need a second Milton bell because you cannot hear your first Milton bell? This bell can be connected to an existing Milton bell using 110V electrical wire. The wiring diagram is included and shows how to connect this Remote bell to a standard Milton bell. The connection requires a two strand 12-AWG wire. This bell requires the Remote Switch pictured below or a standard Milton bell to operate. All electrical wiring should be performed by a qualified electrician.
Tell a friend:
Remote Switch - Milton 825
Remote Switch - Milton 825 - This pneumatic switch is designed to be located near the hose crossing at the driveway. It attaches directly to the end of the driveway hose. This switch can be connected to a remote controlled bell, as pictured above, or some other device that requires a momentary electrical contact.
- One Remote Switch - Milton 825.
- Includes electrical wiring diagram.
All electrical wiring should be performed by a qualified electrician.
Tell a friend:
Loud Vibrating Bell Kit
Low-Voltage linkage for use on very long driveways
This is our loudest bell.
This bell is rated at 87decibels at a distance of ten feet from the bell. It is a very heavy-duty steel bell with a very loud vibrating ring tone. Vibrating bells ring differently than the Milton bell and Original bell. This bell produces a short burst of rings each time a vehicles tires drive across the driveway hose. The Milton and Original bell ring once each time a vehicles tires compress the driveway hose. The duration of ringing occurs only as long as a vehicles tires are compressing the hose.
This customized bell has been tested on driveways up to one-thousand two-hundred fifty feet (1250') in length. The end of driveway unit is a Milton 825, remote switch, pictured just to the left of the Milton bell. The end of driveway unit is connected to the bell using low voltage electrical wire. The electrical wire is not included with the kit.
This low-voltage vibrating bell kit includes:
- One large 10" low-voltage vibrating bell– This bell kit works with the included Milton 825 remote end of driveway switch. This bell cannot have a hose connected directly to the bell and must be operated with the end-of-hose driveway unit.
- One Milton 825 remote end of driveway switch - This unit is pictured to the left of the Milton bell.
- One 24 volt transformer that plugs into an ordinary 110V electrical outlet.
- Twenty-five feet of driveway hose.
- One end-of-hose anchor including two hose clamps.
- Low-voltage electrical wire not included.
Low-voltage electrical wire is not included and the purchaser will need to determine the length needed and visit a hardware store to purchase this wire. It is recommended to use 16 gauge wire.
Tell a friend:
Driveway Hose
Service Station grade driveway hose. Very thick walled hose tolerant of conditions encountered in service station environment such as: Gasoline, oil, gravel, tire traffic, etc. This hose is not sold at hardware stores or home centers.
Tell a friend:
Original end of hose Anchor
Cast iron end-of-hose anchor - This anchor is for the very end of the hose. Includes one hose clamp. One heavy die cast end-of-hose anchor. One hose clamp.
Tell a friend:
Milton end of hose anchor
Cast iron end-of-hose anchor- This anchor can be used for the very end of the hose or can be used as a weighted splice point. There is a hole drilled through the anchor and a nipple on either end allowing for two hoses to be spliced together with this anchor. Includes one hose clamp. One heavy die cast end-of-hose anchor. One hose clamp.
Tell a friend:
Y Hose Splitters
"Y" hose splitter for splitting one hose into two. This will allow you to service two driveways using one driveway bell. Rugged metal construction. This splitter won't fail under heavy use. Fits 3/8" inside diameter driveway hose. Includes three hose clamps.
Government and School Purchase Orders Accepted
Pay Milton's Bells securely with any major credit card.
